energy-saving ball mill

Energy-Saving Ball Mill

The ball mill is the key equipment for crushing the material after it has been crushed. Bailing energy-saving ball mill adopts double-row self-aligning bearings, which reduces energy consumption by 30% and improves the ability to process materials by 15%-20%. The main bearing is grease-lubricated, convenient and clean, eliminating heavy metal pollution.

⌈ Feeding size ⌋:≤20 mm

⌈ Production capacity ⌋:0.5-150 t/h

⌈ Application range ⌋:Grinding various ores and other materials, widely used in cement, silicate products, new building materials, refractory materials, fertilizers, black and non-ferrous metal dressing and glass ceramics and other production industries.

international trade: 0086-371-66888887

Outstanding advantages

  • Save energy

    Matching the drive and grinding energy can save a lot of energy.

  • Flexible design of the discharging department

    The design of the discharge port is reasonable, and the customer can choose the iron remover according to his own needs.

  • Feeding unit has a large amount of feed

    Reasonable inlet design increases the amount of feed.

  • High grinding efficiency and good quality of liner

    The lining plate and grinding body are made of alumina ceramics, quartz, special materials, and the hard minerals are designed with no iron pollution, which reduces the breakage rate and improves the grinding efficiency.

  • Use a closed system to reduce dust

    The ultra-fine ball mill and classifier form a closed system, which is transported under negative pressure without dust and reduces damage to the human body.

  • The rotary part is strong and wear-resistant

    The cylinder, liner plate, medium, compartment board and discharge raft of the turning part are all made up of high quality original parts.

Equipment composition

Energy-Saving Ball Mill

Bailing ball mill consists of rotary body, flagstone, feeder device, feed screw, bearing cover, bearing seat, mill head, frame, tube sheet, frame for driving part, cross bridge bearing block, pinion, reducer, coupler, moter, big gear, big liner and other main parts.

The hollow shaft is made of cast steel, the inner lining can be replaced, the rotary large gear is processed by casting hobbing, and the barrel is embedded with wear-resistant lining, which has good wear resistance.

 

 

Working principle

Energy-Saving Ball Mill

This machine is a horizontal cylindrical rotating device, external gear transmission, two warehouses, lattice ball mill. The material is uniformly fed into the first chamber of the mill by the feeding device through the hollow shaft of the feeding material. The chamber has stepped lining or corrugated lining, which is filled with steel balls of different specifications. The rotation of the cylinder generates centrifugal force to bring the steel ball to a certain height. After falling, it will hit and grind the material. After the material reaches the rough grinding in the first warehouse, it enters the second warehouse through the single-layer compartment board. The warehouse is provided with a flat lining plate with steel balls inside to further grind the material. The powder is discharged through the discharge raft to complete the grinding operation.

Technical Parameters

Model Rotational speed(r/min) Balls weight(t) Feeding size(mm) Output size(mm) Capacity(t/h) Motor power(kw) Weight(t)
Ф900×1200 36 1.0 ≤20 0.074-0.4 0.5-1.5 18.5 4
Ф900×1800 36 1.5 ≤20 0.074-0.4 1.1-3.5 22 4.8
Ф900×2100 36 1.7 ≤20 0.074-0.4 0.7-3.5 15 3.9
Ф900×3000 36 2.6 ≤20 0.074-0.4 1.5-4.8 30 6
Ф1200×2400 31 3.5 ≤25 0.074-0.4 1.6-5 30 9.5
Ф1200×2800 31 6.8 ≤25 0.074-0.4 1.5-5 37 13
Ф1200×4500 32 5.5 ≤25 0.074-0.4 1.6-5.8 55 13.8
Ф1500×3000 33.8 6.8 ≤25 0.074-0.4 3-9 110 19
Ф1500×4500 27 10.5 ≤25 0.074-0.4 3.5-8 110 21
Ф1500×5700 25 13 ≤25 0.074-0.4 3.6-11 130 24
Ф1830×3000 23.8 10 ≤25 0.074-0.4 4-11 130 25
Ф1830×3600 23.8 12 ≤25 0.074-0.4 4.3-12 155 32
Ф1830×4500 26.5 17 ≤25 0.074-0.4 5.5-20 185 35
Ф1830×6400 25 21 ≤25 0.074-0.4 6-17 210 38
Ф1830×7000 22.5 23 ≤25 0.074-0.4 6.5-18 210 43
Ф2100×3000 23 13 ≤25 0.074-0.4 5-15 180 42
Ф2100×3600 23.8 16 ≤25 0.074-0.4 6-17 210 45.8
Ф2100×4500 23 20 ≤25 0.074-0.4 7-21 245 52.6
Ф2100×7000 23 31 ≤25 0.074-0.4 8-25 280 65
Ф2200×3600 21.7 17.5 ≤25 0.074-0.4 8-21 245 42.8
Ф2200×4500 23.7 22 ≤25 0.074-0.4 9-25 280 46.5
Ф2200×5500 21 30 ≤25 0.074-0.4 10-20 245 48.5
Ф2200×6500 21.7 35 ≤25 0.074-0.4 14-26 380 52.8
Ф2200×7500 21 33 ≤25 0.074-0.4 16-30 380 56
Ф2200×9000 21.5 44 ≤25 0.074-0.4 9-25 280 61.8
Ф2400×3000 20.6 30 ≤25 0.075-0.4 15-50 245 59
Ф2400×3600 21 21 ≤25 0.074-0.4 9-25 280 61.8
Ф2400×4500 21 26 ≤25 0.074-0.4 15-60 380 65
Ф2400×6500 21 38 ≤25 0.074-0.4 14-42 475 76.7
Ф2400×7000 21 41 ≤25 0.074-0.4 14-42 475 76.7
Ф2400×7500 21 44 ≤25 0.074-0.4 15-45 475 78.9
Ф2400×10000 21 58 ≤25 0.074-0.4 18-55 680 94.5
Ф2400×11000 21 64 ≤25 0.074-0.4 19-58 680 99.2
Ф2400×13000 21 75 ≤25 0.074-0.4 25-60 800 115.2
Ф2700×3600 20.7 26 ≤25 0.074-0.4 12-35 380 82
Ф2700×4000 20.7 29 ≤25 0.074-0.4 15-36 380 85
Ф2700×4500 20.7 33 ≤25 0.074-0.4 15-40 430 97
Ф3000×9000 19 109 ≤25 0.074-0.4 22-80 680 168.6
Ф3000×12000 19 134 ≤25 0.074-0.4 25-85 800 196.3
Ф3200×4500 18 65 ≤25 0.074-0.4 According to the process conditions 800 137
Ф3600×4500 17 90 ≤25 0.074-0.4 According to the process conditions 850 158
Ф3600×6000 17 110 ≤25 0.074-0.4 According to the process conditions 1250 175
Ф3600×8500 18 131 ≤25 0.074-0.4 45.8-256 1800 252
Ф4000×5000 16.9 121 ≤25 0.074-0.4 45-208 1500 203
Ф4000×6000 16.9 146 ≤25 0.074-0.4 65-248 1600 218
Ф4000×6700 16.9 149 ≤25 0.074-0.4 45-252 1800 238
Ф4500×6400 15.6 172 ≤25 0.074-0.4 54-306 2000 280
Ф5030×6400 14.4 216 ≤25 0.074-0.4 68-386 2500 320
Ф5030×8300 14.4 266 ≤25 0.074-0.4 88-500 3300 403
Ф5500×8500 13.8 338 ≤25 0.074-0.4 108-615 4500 525

Note: the production capacity of different materials is different, please consult for more details: 0086-371-66888887

Product display

Energy-Saving Ball Mill

We promise

1. Pre-sales service, actively provide technical data support for customers, free to provide program design and investment quotation estimates.

2. Provide customers with tailor-made global transportation arrangements to ensure safe and fast delivery of goods.

3. Regularly return visits to all users to track product usage, ensure that equipment is in optimal working order, and help customers achieve maximum benefits.

Related materials

  • Gypsum Milling

  • Limestone Milling

  • Iron powder

  • Iron Ore Processing

  • Quartz Sand

    Quartz Sand

Accessories

  • 球磨机衬板

    Ball Mill Liner

  • Ball mill grate

  • 球磨机齿轮

    Pinion

  • 球磨机齿轮

    Ball Mill Gear

Related devices

  • dry ball mill

    Dry Ball Mill

  • batch ball mill

    Batch Ball Mill

  • Raymond mill

    Raymond Mill

  • rod mill

    Rod Mill

  • mobile ball mill

    Mobile Ball Mill

Contact us

International Trade Department

  • TEL:0086-371-66888887
  • Email:sales@bljq.com
  • WhatsApp:+86-18203639337
  • You can also leave your contact information and product requirements in the form below, our engineers will contact you as soon as possible!
Return to the top

All copyright © BAILING MACHINERY Service hotline:0086-371-66888887 / 18203639337 Links:ball mill ball mill machine rotary dryer rotary kiln