wet ball mill

Wet Ball Mill

The wet ball mill refers to grinding the raw material after humidification, and has high fineness and good beneficiation effect. The discharge port of the device is a trumpet-shaped, built-in screw device, which is convenient for discharging materials, has reasonable structure, simple operation and stable operation. At present, the sales of wet mills in the mill market occupy an important position, which is a popular grinding equipment for the majority of users.

⌈ Feeding size ⌋:≤25 mm

⌈ Production capacity ⌋:0.65-90 t/h

⌈ Application range⌋:Mainly used in mineral processing, chemical and ceramic industries; can handle iron ore, copper, non-ferrous metals and ferrous metals.

international trade: 0086-371-66888887

Outstanding advantages

  • Save energy

    The drive and grinding energy consumption are matched to save energy and save investment costs.

  • High grinding efficiency and good quality of lining

    The lining plate and the grinding body are made of alumina ceramics, quartz, special materials, and the hard minerals are designed with no iron pollution, which reduces the breakage rate and improves the grinding efficiency.

  • Use a closed system to reduce dust

    The ultra-fine ball mill and classifier form a closed system, which is transported under negative pressure without dust and reduces damage to the human body.

Equipment composition

1、Mill barrel: The mill barrel of the wet ball mill is composed of a steel plate rolled into a cylinder and two manholes with a manhole frame. The two ends of the barrel are all machined, and the barrel is drilled for fixing. The inner surface of the mill barrel.

2、End caps and trunnions: The inlet and outlet end caps of the mill are designed and manufactured by castings, and are connected by bolts and mill barrels. The inlet and outlet end caps are designed with a complete support trunnion. The trunnion of the inlet end cap is designed as a fixed support, and the trunnion of the outlet end cap is designed as a swimming support.

3、Main bearing: The bearing is mounted on the trunnion of the end cap of the mill and held in the mounting position by a pressure ring. The bearing housing is made of carbon steel.

4、Base: The main bearing housing, main gearbox and main drive motor are mounted on the base of the wet ball mill. The base is equipped with adjustment bolts for easy adjustment. All anchor bolts are included in the base.

5、Feeding section: The mill feeding system consists of an inlet chute lined with wear-resistant material inside and a bearing seat and base supporting its weight.

Working principle

The wet ball mill is driven by the motor to drive the cylinder to rotate. The crushed ore and steel ball in the cylinder are subjected to friction and centrifugal force when the cylinder is rotated. After being brought to a certain height by the lining, the ball is thrown and discharged due to gravity. The ore is gradually crushed under the action of impact and grinding. The crushed ore is discharged out of the cylinder through the discharge portion. After the discharged minerals are classified into qualified products in the spiral classifier, the coarse sand is returned to the ball mill through the combined feeder and continues to be ground. The feeder feeds continuously and evenly, and the ore enters the ball mill continuously and uniformly through the combined feeder, and the ground material is continuously discharged from the ball mill.

Technical Parameters

Model Rotational speed(r/min) Balls weight(t) Feeding size(mm) Output size(mm) Capacity(t/h) Motor power(kw) Weight(t)
Ф900×1800 42 1.4 ≤20 0.075-0.89 0.65-2 18.5 3.6
Ф900×2100 41 1.7 ≤15 0.075-0.83 0.7-3.5 15 3.9
Ф900×3000 41 2.7 ≤20 0.075-0.89 1.1-3.5 22 4.5
Ф1200×2400 36 3.5 ≤25 0.075-0.6 1.5-4.7 30 11.5
Ф1200×2800 31 6.8 ≤25 0.075-0.6 1.5-5 37 13
Ф1200×4500 32 5.5 ≤25 0.074-0.4 1.6-5.8 55 13.8
Ф1500×3000 31 6.8 ≤25 0.074-0.4 2-7 75 17
Ф1500×4500 27 10.5 ≤25 0.074-0.4 3.5-8 110 21
Ф1500×5700 27 15 ≤25 0.074-0.4 3.5-10 130 24.7
Ф1830×3000 26 13 ≤25 0.074-0.4 4-12 160 28
Ф1830×3600 26 15 ≤25 0.075-0.4 5-13 160 33.5
Ф1830×4500 26.5 17 ≤25 0.075-0.6 5.5-20 185 35
Ф1830×7000 26 25 ≤25 0.074-0.4 6.5-22 210 36
Ф2100×3600 24 21 ≤25 0.074-0.4 6.5-22 185 46.8
Ф2200×5500 21 30 ≤25 0.074-0.4 10-20 245 48.5
Ф2200×6500 21.7 35 ≤25 0.074-0.4 14-26 380 52.8
Ф2200×7500 21 33 ≤25 0.074-0.4 16-30 380 56
Ф2400×3000 20.6 30 ≤25 0.075-0.4 15-50 245 59
Ф2400×4500 21 33 ≤25 0.074-0.4 15-60 380 65
Ф2700×3600 20.6 39 ≤25 0.074-0.4 20-70 400 91.3
Ф2700×4000 20.7 40 ≤25 0.074-0.4 20-80 400 94
Ф2700×4500 20.7 48 ≤25 0.074-0.4 20-90 430 102
Ф3200×4500 18 65 ≤25 0.075-0.4 according to the process conditions 800 137

Note: the production capacity of different materials is different, please consult for more details: 0086-371-66888887

Product display

干式球磨机

 

We promise

1. Pre-sales service, actively provide technical data support for customers, free to provide program design and investment quotation estimates.

2. Provide customers with tailor-made global transportation arrangements to ensure safe and fast delivery of goods.

3. Regularly return visits to all users to track product usage, ensure that equipment is in optimal working order, and help customers achieve maximum benefits.

Related devices

  • energy-saving ball mill

    Energy-Saving Ball Mill

  • dry ball mill

    Dry Ball Mill

  • Tower mill

    Tower Mill

  • mobile ball mill

    Mobile Ball Mill

  • high pressure roller mill

    High Pressure Roller Mill

Contact us

International Trade Department

  • TEL:0086-371-66888887
  • Email:sales@bljq.com
  • WhatsApp:+86-18203639337
  • You can also leave your contact information and product requirements in the form below, our engineers will contact you as soon as possible!
Return to the top

All copyright © BAILING MACHINERY Service hotline:0086-371-66888887 / 18203639337 Links:ball mill ball mill machine rotary dryer rotary kiln